Witon Flooring offers a comprehensive range of aluminium profiles to the flooring market, assisting to make installations much easier and less time-consuming.

Aluminium profiles require minimal maintenance, are longer wearing and more cost effective then other alternatives in the market.

Products include but are not limited to Covers, Ramps or Transitions, Expansion and Movement Joint Profiles, Carpet Fitting Profiles and Stair Nosing or Edge Protection. Our standard colour range is natural silver, light and dark bronze as well as analok and black.

CARPET FITTINGS

Tread



Used to finish off glued-down carpet or carpet tiles.


  • Provides a neat border for carpets

  • Ensures a non-trip surface

  • Can be glued down with Contact Adhesive

  • Can be drilled for easy installation for use with nails or screws

  • Offers economical bridging between different surface heights

CT Tread



Similar to Tread but has a more robust profile.


  • Provides an alternative finish to tread

Naplok



Used to finish off stretch carpets fitted on underfelt.


  • Provides a neat finish to carpets

  • Provides a non-trip finish

  • Prevents carpets slipping out by means of 3 rows of teeth

  • Stops carpets fraying

Varistrip



Used to finish either glue-down (without teeth) or stretch-type (with teeth), against ceramics or wooden flooring.


  • Has an adjustable leg to accommodate different heights

  • Provides a non-trip finish

  • Has a large wear section to allow for 8mm expansion in laminate flooring

  • An extremely attractive finish to any job

Thriftline



Used to finish off glued-down type carpets or carpet tiles


  • Provides a neat finish

  • Stops carpet tiles from moving

  • Provides a non-trip surface

  • Hides fixing nails

LVT ALUMINIUM FITTINGS

LVT Mini Clip Adaptor



Used as a trip free transition between varying heights


  • With ratchet systems allows for thicknesses of 5mm - 7mm

  • Allows for 8mm expansion or contraction

  • When used in conjunction with clip base no visible fixing

  • Easy-fitting once base is screwed into sub-floor, top is tapped into place with a rubber mallet

LVT Expansion Joint



Allows for the expansion of luxury Vinyl floors at intervals recommended by flooring manufacturers.


  • Flush finish a non-trip section

  • Allows for expansion and contraction of luxury vinyl tiles

  • With ratchet systems allows for thicknesses of 5mm - 8mm with LVT Base

  • Invisible Fixings

LVT End Cap



Used to fit at the end of luxury vinyl flooring.


  • With ratchet systems allows for thicknesses of 5mm - 7mm

  • Allows for 10mm expansion or contraction on luxury vinyl tiles

STAIR NOSING AND EDGE PROTECTORS

Stair Nosing - Single



Used on steps where an edge protection is required.


  • Offers a non-trip/slip finish

  • Provides a neat finish to all stairway systems

  • Has a rebate in insert for easy fixing

  • Variety of insert colours

  • Carpet strips can be used instead of vinyl inserts

Stair Nosing - Double



Used where extra edge protection is required.


  • Also used where Single Stair Nosing is too small to secure to the step

  • Provides extra non-trip/slip properties

  • Same as Single Square Nosing except two different colour inserts can be used

Bull Nosing - Double



Offers a more rounded finish on steps.


  • Provides the same robust features as Double Stair Nosing

  • Also used where Single Stair Nosing is too small to secure to the step

  • Provides extra non-trip/slip properties

  • Provides a neat finish to all stairway systems

Carpet Tile Nosing



Used on steps as an edge protection when fitting a floor cover with a height of 6mm.


  • Provides a non-trip finish

  • An aesthetically pleasing finish to staircases with stick-down carpet tiles installed

  • An easy profile to install

Flat Nosing – 50mm



Used where an edge protection is required.


  • Provides a non-trip finish

  • No insert required which offers an attractive metal finish to all stairway needs

  • Can be fixed to step with contact adhesive or screws/nails

  • Neat and non-bulky

Easy Cover



Is similar to the Coverstrip


  • Provides a large neat surface to cover large gaps

  • Provides a large neat transition between ceramics tiles and stretch carpets

  • Invisible fastening

  • Offers an aesthetically pleasing finish

LAMINATES AND WOOD FLOORING TRIMS

Clip Adaptor



To bridge the height difference between a lower-lying floor and laminate flooring forming a ramp.


  • Safety a trip-free transition between varying heights

  • With ratchet systems allows for thicknesses of 7mm - 10mm

  • Allows for 14mm expansion or contraction

  • When used in conjunction with clip base no visible fixing

  • Easy-fitting once base is screwed into sub-floor, top is tapped into place with a rubber mallet

Clip Expansion Joint



Allows for the expansion of laminate flooring at intervals recommended by flooring manufacturers.


  • Flush finish a non-trip section

  • Allows for 15mm expansion and contraction of laminate or engineered wood flooring

  • With ratchet systems allows for thicknesses of 7mm - 10mm with Clip Mini Base or 13mm to 15mm with Clip Base

Clip End Cap



Used to fit at the end of laminate flooring. (The same as Wood Edge except that it is used with a base to provide an adjustable height to accommodate different thicknesses of wood flooring).


  • With ratchet systems allows for thicknesses of 7mm - 10mm

  • Allows for 15mm expansion or contraction on laminate or engineered wood flooring

Mini Transition



Used to bridge the height difference between a lower lying floor and wood/laminate flooring forming a ramp.


  • When used with base allows for expansion of wood and allows trolleys to ramp onto the flooring

  • Safety a trip-free transition between varying heights

  • Can be pre-drilled

  • Used to fit floors with a thicknesses of 7mm - 10mm

  • Allows for 12mm expansion or contraction

Transition



To bridge the height difference between a lower-lying floor and engineered wood flooring forming a ramp.


  • When used with base allows for expansion of wood and allows trolleys to ramp onto the flooring

  • Safety a trip free transition between varying heights

  • Can be pre-drilled

  • Allows for 16mm expansion and contraction of laminate/ engineered wood flooring

  • Used to fit floors with a thicknesses of 10mm - 15mm

Mini Wood Expansion Joint



Allows for the expansion of wood/laminate flooring at intervals


  • Recommended by flooring manufacturers

  • Flush finish a non-trip section

  • Can be pre-drilled

  • Used to fit floors with thicknesses of between 7mm - 10mm

  • Allows for 12mm expansion or contraction

Wood Expansion



Allows for the expansion of engineered wood flooring at intervals recommended by flooring manufacturers.


  • Flush finish a non-trip section

  • Can be pre-drilled

  • Allows for 16mm expansion and contraction of laminate/ engineered wood flooring

  • Used to fit floors with thicknesses of between 10mm - 15mm

Coverstrip – 50mm



Has similar uses to tread but provides larger area coverage


  • Provides a large neat surface to cover large gaps

  • Provides a large neat transition between ceramics tiles and stretch carpets

  • Covers wear area caused by carpet gripper under stretch carpeting in traffic areas

  • Can be used as an expansion joint cover on its own

Wood Edge



Used to fit and protect the end of laminate flooring 7mm - 8mm thick. Providing a robust expansion accommodating finish


  • This product is manufactured in aluminium for extra durability

  • Offers an easy installation

  • Hides fixing screw/nail heads from view

Wood End



Used to fit at the end of engineered wood flooring. (The same as Wood Edge except that it is used with a base to provide an adjustable height to accommodate different thicknesses of wood flooring).


  • Used with its base can be adjusted for different heights by the use of screws of varying heights

  • Can be pre-drilled

  • Allows for 21mm expansion and contraction of laminate/ engineered wood flooring

  • Used to fit floors with thicknesses of between 10mm - 15mm

TILE FITTINGS

Straight Edge – 3mm



Offers a neat finish to any tiling job


  • Profiles that allow for a bend in the same or different floor coverings of the same height.

  • Can be used on a step before installing the tiles as edge protection

  • Special punched base allows for the profile to be installed into tile adhesive

  • Provides a neat finish

  • Provides a neat finish on stairs with ceramic tiles


Also available in the following sizes:


5mm Straight Edge, 8mm Straight Edge, 10mm Straight Edge, 12mm Straight Edge

Angle Edge



Used for corner protection on platforms, counter tops and exposed corners or on open staircases.


  • Neat patterned ribbed finish

  • Decorative patterned finish

  • Neat finish on laminated stairs

  • Sizes 16x16, 25x25, 21x21

Tile Ramp



Designed to facilitate the movement of trolleys over a small step from one floor covering to the next.


  • Where a heavy-duty ramp is required

  • Can be built up with screed or tile cement to allow for a much steeper incline

  • Offers anti-slip ribs for a non-trip/slip finish